ADC12 Aluminium Alloy Ingot
ADC12 combines excellent fluidity, pressure tightness and resistance to hot cracking with good machinability. It is the first choice for high-pressure die casting of automotive, two-wheeler and general engineering parts.
Aluminium Alloy Ingots
Standard JIS, BS and AA grades in regular production, plus custom chemistries cast to your specification.
Our Range
Grades We Manufacture
We specialise exclusively in aluminium. Each grade below is produced from carefully segregated scrap and verified on our in-house spectrometer before casting. Many more grades are available on request.
LM6 Aluminium Alloy Ingot
LM6 has near-eutectic silicon content giving superb castability and very good resistance to corrosion, including marine atmospheres. It suits large, thin-walled and complex sand and gravity castings.
Key Properties
Typical Applications
ADC1 Aluminium Alloy Ingot
ADC1 offers excellent fluidity and corrosion resistance with lower copper than ADC12. It performs well in thin-walled, large-area die castings where filling is critical.
Key Properties
Typical Applications
A356 Aluminium Alloy Ingot
A356 responds well to T6 heat treatment, delivering a strong balance of strength, elongation and fatigue resistance. It is the standard alloy for cast aluminium wheels and safety-critical structural castings.
Key Properties
Typical Applications
ADC6 Aluminium Alloy Ingot
ADC6 is an aluminium-magnesium alloy with the best corrosion resistance in the ADC family and an attractive surface that anodises well. It is preferred for decorative and marine applications.
Key Properties
Typical Applications
Technical Data
Typical Chemical Composition (wt %)
Values are maximum unless shown as a range, based on the referenced standards. Aluminium makes up the remainder.
| Grade | Si | Cu | Mg | Fe | Mn | Zn | Ni | Ti | Sn |
|---|---|---|---|---|---|---|---|---|---|
| ADC12 | 9.6 - 12.0 | 1.5 - 3.5 | 0.3 | 1.3 | 0.5 | 1.0 | 0.5 | - | 0.2 |
| LM6 | 10.0 - 13.0 | 0.1 | 0.1 | 0.6 | 0.5 | 0.1 | 0.1 | 0.2 | 0.05 |
| ADC1 | 11.0 - 13.0 | 1.0 | 0.3 | 1.3 | 0.3 | 0.5 | 0.5 | - | 0.1 |
| A356 | 6.5 - 7.5 | 0.2 | 0.25 - 0.45 | 0.2 | 0.1 | 0.1 | - | 0.2 | - |
| ADC6 | 1.0 | 0.1 | 2.5 - 4.0 | 0.8 | 0.4 - 0.6 | 0.4 | 0.1 | - | 0.1 |
Composition shown is indicative for reference only. We cast to the exact chemistry on your purchase order and can share spectro analysis for each lot on request.
Supply Options
Flexible for Foundries of Every Size
Custom Grades
Share your target chemistry and tolerance band. We adjust our melt to match your exact requirement.
Spectro Analysis
Every heat is analysed on our VAS spectrometer. Lot-wise analysis available with your supply.
Bulk & Regular Orders
One-time lots or scheduled monthly supply, dispatched from Mathura across North India and beyond.
Bulk & regular supply